| Reference | Title |
|---|---|
|
ISO-5167 |
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part1: General principles and requirements, Ref. number: ISO 5167-1:2003(E) Part2: Orifice plates, Ref. number: ISO 5167-2:2003(E) Part3: Nozzles and Venturi nozzles, Ref. number: ISO 5167-3:2003(E) Part4: Venturi tubes, Ref. number: ISO 5167-4:2003(E) Part5: Cone meters, Ref. number: ISO 5167-5:2016(E) |
|
ISO-6976 |
Natural gas - calculation of calorific values, density, relative density and Wobbe index from composition, Ref. number: ISO 6976:1995/Cor 1:1997 |
|
ISO-12213-1 |
Natural gas - Calculation of compression factor - Part1: Introduction and guidelines, Ref. numbers: ISO 12213-1:2006; EN ISO 12213-1:2009 |
|
ISO-12213-2 |
Natural gas - Calculation of compression factor - Part2: Calculation using molar-composition analysis, Ref. numbers: ISO 12213-2:2006; EN ISO 12213-2:2009 |
|
ISO-12213-3 |
Natural gas - Calculation of compression factor - Part3: Calculation using physical properties, Ref. numbers: ISO 12213-3:2006; EN ISO 12213-3:2009 |
|
ISO-20765-1 |
Natural gas - Calculation of thermodynamic properties - Part 1: Gas phase properties for transmission and distribution applications, Ref. number: ISO 20765-1:2005 |
|
ISO-20765-2 |
Natural gas - Calculation of thermodynamic properties - Part 2: Single-phase properties (gas, liquid, and dense fluid) for extended ranges of application, Ref. number: ISO 20765-2:2015 |
|
International Standard - Draft ISO/DIS-20765-5 |
Natural gas - Calculation of thermodynamic properties - Part 5: Calculation of viscosity, Joule-Thomson coefficient, and isentropic exponent, Ref. number: ISO/DIS 20765-5 |
|
ISO-14912 |
Gas analysis - Conversion of gas mixture composition data, Ref. number: ISO 14912:2003 |
|
AGA Report No. 3 |
ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS Part 1: General Equations and Uncertainty Guidelines, (Third Edition, October 1990, 2nd printing, June 2003), American Gas Association and American Petroleum Institute, 1990, 2003. Part 4: Background, Development, Implementation Procedure, and Subroutine Documentation for Empirical Flange-Tapped Discharge Coefficient Equation, (Third Edition, October 1992, 2nd Printing, August 1995, 3rd Printing, June 2003), American Gas Association and American Petroleum Institute, 1992, 1995, 2003. |
|
AGA Transmission Measurement Committee Report No. 8 |
Compressibility and Supercompressibility for Natural Gas and Other Hydrocarbon Gases, 1985. |
|
AGA Transmission Measurement Committee Report No. 8 |
Compressibility and Supercompressibility for Natural Gas and Other Hydrocarbon Gases, 2nd edition 1992, 2nd printing 1994. |
|
AGA Report No. 8, Part 1 |
Thermodynamic Properties of Natural Gas and Related Gases, DETAIL and GROSS Equations of State, Third Edition, April 2017 (A revision of AGA Report No. 8, 2nd edition, 1994) Prepared by Transmission Measurement Committee, American Gas Association. |
|
AGA Report No. 8, Part 2 |
Thermodynamic Properties of Natural Gas and Related Gases, GERG–2008 Equation of State, First Edition, April 2017 Prepared by Transmission Measurement Committee, American Gas Association. |
|
API Manual of Petroleum Measurement Standards |
Chapter 11 - Physical Properties Data Section 1 - Temperature and Pressure Volume Corretion Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils, 2004. |
|
IAPWS R7-97(2012) |
Revised Release on the IAPWS Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam, 2012. |
|
Flow Measurement Engineering Handbook, 2nd edition, McGraw-Hill, New York, 1996. |